Making Your Own Replacement Key For Saab 93 Viggen
Saab owners who lose their keys might be concerned about the cost and inconvenience to replace it. However, there is a solution to avoid the expense of making your own key fob.
You’ll require a phillips screwdriver with a flat head to accomplish this. Insert the screwdriver into the slot in the middle of the case and slowly push it open.
Cost
Some used cars only have one key, and the majority of SAABs come with two keys. In this scenario the owner needs to purchase a new key, and it is costly. There are a lot of ways to save money on this process. If you just need to replace the case for your key fob and not the emergency key or badge, you can save some money by buying a used case from a dealer. These cases do not have the emergency badge or key, and tend to wear out quickly.
In addition to the cost of a brand new key, you’ll also have to pay for the installation and programming of the TWICE module. These costs can quickly add up, especially if you don’t have an extra.
For this reason, it is essential to have two keys to your car. This way, if you lose the only key that works it won’t leave you without transportation.
The good news is that adding another key to your Saab 9-3 is not as difficult as it might appear. The only issue is that you have to connect the key to the car’s computers. This can be done by an auto dealer, however it could take a while to arrange an appointment. Luckily, you can locate the necessary information online to help you with the procedure.
Installation
Most Saab vehicles manufactured after 1995 come with an immobilizer system that uses keys to control the engine. The system also controls door locks and remote functions of the vehicle. It is crucial to have a spare key to prevent losing the original and causing your car to be stolen. The good news is that if you lose your primary working Saab key, there are ways to replace it without having to pay an expensive dealer service.
First, you need to make the new key fob. It is done by using the flathead screwdriver for prying the case open. Simply place the screwdriver in an opening in the middle of the case, and then gently work it. If you’re having trouble, try using different angles. After you’ve opened the case, you can remove the electronics and put them in a brand-new fob case.
You can begin the process of programming after you have the fob and key replacement. You’ll need to connect your Tech2 and then follow the steps for NG 9-3 using or without a transponder. It is recommended that you get a replacement TWICE that is already connected to the correct key by using transponders. It is possible to find this unit online. However, you should make sure that it is an OEM replacement.
Programming
In general, adding an extra key for Saab 9-3 requires a special tool called a Tech 2. It also requires programming the vehicle to recognize the new keys. This is a much more complex process than simply copying a key made of metal. It should be handled by a professional to avoid damaging the electronic system of the vehicle. If you’re considering acquiring an additional key to your car, you should try to do it as quickly as you can. In the event of delay, it could result in higher costs in the future.
It is also necessary to replace either the CIM or TWICE modules. This is usually an order-by-mail process and isn’t something that you can do through an aftermarket vendor. The cost of purchasing a new vehicle can be costly, based on the model.
The dealer will charge you the highest dollar for replacing the car computer, but there’s a different option! S.A. Locksmith & Security will RE-Program your saab key fob programming computer to prepare it for the new key. This will save you the cost of a new car computer. This service is fast, affordable and easy. It can save you up to up to 50% or more when compared to what a dealer will charge you! This is a great option for those who have lost saab key their keys.
Remotes
The Saab 9-3 Viggen was one of the most distinctive cars to ever wear the Saab badge. It was an Scandinavian, front-drive fighter jet-inspired beast that was incredibly fast and enjoyable to drive. While a variety of other Saab models followed it, none were as distinctive.
If you have a 9-3 Saab and lose your key fob, you need to replace it as quickly as you can. Saab vehicles come with an immobilizer feature, which requires a special key in order to start. The replacement process is straightforward if you have a spare key, but it could be expensive and time-consuming if there isn’t an additional key.
You can save money by buying a used replacement key fob and getting it programmed by a local locksmith. However, you must be cautious about buying used keys on eBay and other online outlets. They might not be authentic and you may end up paying more in the end.
Anyone can remove the electronics and battery of an old key fob using a small flathead phillips screwdriver. Be cautious not to scratch any of the tiny electronic components within the case. It is also important to be careful not to pour liquids onto the inside of the case as it can cause damage. Additionally, you should not purchase a cloned key from any aftermarket sellers since they might not be compatible with the CIM of your vehicle.