Ghost Immobiliser Installation
Install a ghost immobiliser on your vehicle to protect it from car thieves. Our TASSA confirmed system safeguards vehicles from hacking, key cloning and vehicle immobiliser bypass.
The system is hidden in the wiring loom in your vehicle and is inaccessible to anyone who is looking. It is created by generating the pin code push sequence through existing buttons on the steering wheel doors, door cards, and the central console.
No circuit cuts
It’s not surprising that car owners are keen to secure the vehicle they have spent so much money to purchase. Traditional security systems, such as alarms or wheel locks, are easily manipulated by thieves. Ghost immobilisers are extremely effective solution that works in a quiet manner and isn’t detected by modern thieves.
Ghost immobilisers, also known as a hidden device, is a device that connects to your vehicle’s data network CAN to shut off the engine. It does this without the use of key fobs or radio frequencies. It communicates with the vehicle’s ECU by using buttons on the steering wheel, dash, and door panels to generate an individual pin code that you only are aware of. The code can be changed at any time, and can have up to 20 digits depending on your preferences. It also includes a secure emergency code that you can use should you forget your PIN.
The ghost immobiliser can also be useful to prevent the relay box inside your home from transferring the signal from your car key, which would open the doors and start your vehicle. It also blocks high-tech methods to steal your vehicle, including OBD port hacking. The device is small and weatherproof, so it’s difficult to see and even harder to tamper with.
Another benefit of the ghost immobiliser is that it can be installed in your car without any permanent marks. It is ideal for those who plan to sell their car in the near future. It’s also quicker and more simple to install compared to a factory-fitted unit.
The Autowatch Ghost, a groundbreaking new-generation device, prevents thefts of cars using contactless technology by connecting to a vehicle’s CAN network and using the buttons to generate a unique PIN code. This is a stealthy device that can be installed without cutting wires and does not require additional key fobs. It is also connected to the vehicle’s original ECU, preventing thieves from gaining access to it using a new key or replacing the ECU with an “relay”. This system is TASSA verified and can be connected to an International Security Register, allowing owners confidence that their vehicles are secure from theft.
No scanning by RF
If you’ve put an enormous amount of time and money into the customisation of your vehicle, you will want to protect it from theft. One method to do this is to install an immobiliser, which will stop the engine from starting until you enter a unique PIN code. Utilizing the buttons on your steering wheel and dashboard, you can generate an apex of 20 digits long that is only known by you, ensuring that only you have access to your vehicle. It is also possible to create a service and valet mode that will allow you to start your car for a short period without having to enter the PIN code. This will allow the technician to work on your vehicle without being present. This feature is great for those who want to reduce time and make their lives easier.
Ghost immobilisers are next generation device that connects to your vehicles CAN data network and utilizes the buttons on the dashboard and steering wheel to program a personal PIN code. It is designed to blend into with the vehicle’s design, as it doesn’t emit any sound or LED indicators. It can be installed anywhere on your vehicle without impacting the appearance of your vehicle.
This stealthy system is TASSA approved and could reduce the cost of insurance. It has a tracking feature that can locate your vehicle even if it’s gone missing. This is particularly useful if have a costly or rare vehicle that you’ve invested lots of time customizing.
The Autowatch Ghost 2 immobiliser can be used together with an iPhone application that allows you to start your vehicle remotely in the event you forgot your PIN or not able to access the vehicle due to some reason. This feature is great for those who need to do some errands, or drop off your kids but don’t want to risk having someone else drive your car. It can also be helpful in the event that you need to bring your vehicle to a mechanic for maintenance or repair.
The Ghost has the advantage that it doesn’t transmit or detect radio frequencies and is therefore undetectable by thieves who use RF scanning and code grabbing techniques. It is also able to protect your car against key copying and ECU swapping as well as other typical methods of theft from cars.
No key cloning
Ghost immobilisers can be a great way to protect top-end vehicles and stop key copying. They stop your vehicle from starting until a PIN code has been entered with the standard key fob. This makes it more difficult for thieves to steal the vehicle, and may even stop them from trying. This is a particularly good idea if you have invested a lot of time and money in personalising your vehicle or have a unique or expensive model.
The immobilisers are connected to the vehicle’s CAN data network and are completely concealed, which means that their presence isn’t visible. It is also impossible for a burglar to identify the device using radio frequency scanning or code technology for grabbing. This means that a burglar will need to invest much longer to take your car.
To bypass the system thieves must know the unique pin code and the location of the Ghost. The pin code is specific to you and may be altered as many times as you like. The pin code you select is easy to remember but mathematically difficult for anyone else to figure out. The engineer will also provide an emergency pin code in case you forget your pin.
The Ghost CAN Bus immobiliser could be easily installed anywhere on your vehicle. It works with all vehicles and is completely customizable to match the style of your car. It is also cost-effective and simple to use. The device can be transferred to a different vehicle, if it is compatible with the new vehicle.
The CAN bus is compatible with other security features. It can, for example, detect damage to the vehicle and notify the owner. It also can shut down the engine if the vehicle is damaged. The system will safeguard your vehicle from hacking and autowatch ghost immobiliser Fitting key duplicate. It also detects vibrations or contact with the vehicle. It can also notify the owner when the vehicle is moving.
No OBD port hacking
Ghost uses a hidden immobiliser module connected to your vehicle’s CAN data network which stops thieves from hacking into your car to disable the alarm, turn off the key fob and code new keys. This technology is a significant improvement over the methods that have been employed by thieves in the past to take your vehicle. The CAN data network also means that your system won’t be affected if you disconnect or change your battery.
The autowatch Ghost Immobiliser Fitting Ghost is the first immobiliser for CAN bus worldwide, safeguards against key-cloning, hacking and replica car theft. It does not utilize LED indicators or key fobs. Instead, it relies on the buttons on your steering wheel, console and door panels.
Modern thieves use diagnostics to detect cuts in the circuit on your vehicle and can bypass immobilisers that require a large amount of wiring or are built into the wiring. The Ghost is weatherproof and doesn’t require any additional wiring. It is not detected by diagnostic tools of a professional. It can even be installed on vehicles that are fitted with anti-theft systems.
Another advantage of the Ghost immobiliser is that your vehicle can only be started by a person who knows the PIN code and has physical access to your car. This is a significant benefit over traditional security systems that can be bypassed with simple cable tampering, a screwdriver or the use of an universal remote controller.
You can easily reset your PIN in case you forget it using the emergency PIN override feature of mobile phones or computers. This is a great option when you want to start your car after it’s in a garage, or the valet parking service.
The Autowatch Ghost 2 has been accepted for insurance by TASSA and can be installed by our authorised installers. It has an RFID fingerprint system that allows parts to be identified, which will enable the return of stolen components in the event that they are found, and it can be switched into ‘service mode’, which will allow the engine to start when the vehicle is in a garage or using valet parking services however you must enter your PIN number to leave the vehicle.